UnInterruptible Power Supply

Un Interruptible Power Supply or simply UPS, are now the essential part of the daily life in the countries where Power Failure is very common. In the beginning the UPS were very expensive so they were used only with the very expensive equipment which requires continuous supply of power. As the UPS became cheaper its usage expanded and they became an essential piece of equipment for Data Centers and Business Computers UPS are also being used now with Personal Computers, Entertainment systems etc etc.

The size of UPS depends upon its capacity ,the capacity can be from 200 VA to many Hundered VA. Normally UPS are used with Dry Batteries but it depends on the user .Dry Batteries are used in it as they are maintenance free and no harmful fumes comes out of it. When wet batteries are used with UPS ,it must be understood that these wet batteries require maintenance and these are harmful for the health of humans when they are placed inside the room due to their harmful fumes.
By type they can be Off Line ,On Line and Line Interactive.Off Line UPS are normally cheap in price.

Kingston HyperX 1.2 GHz DDR2 RAM

The ram is having a hard time catching up to the latest processors having FSB of over 1 GHz. Intel's Server processors already have a FSB of 1333MHz and AMD Athlons have hyper transport speed of 2GHz. Just when RAM was becoming a bottleneck in a system's performance, Kingston released DDR2 RAM running at 1.2 GHz. There have been attempts by various manufacturers to reach that magical number, but none of them are in a position to make them widely available. Kingston introduced this speed in their top-of-the-line memory sticks; Hyper-X. Price: $525 (Rs. 24,000)

Computer Tip Mouse ClickLock

The computer mouse, in all possible ways, like the touchpad for laptops and the graphical pen, has been an inseparable part of every computer user throughout the world. In fact, thinking about starting up your computer and doing all your tasks with the pure keyboard is like a nightmare! Especially when it comes to working in some complex environments like the Internet or getting busy handling some heavy computer operations.
A friendly companion of mouse usage is its capability to make our computing lives more fruitful by letting us do some mouse related tasks with ease. All of you are probably familiar with the dragging and dropping process. It’s no new phenomenon and we do it nearly everyday; for making shortcuts, for moving our files or for making copies of some applications and data types inside some other folders.
Your first and best guess for dragging your files to different locations is through clicking on a file and holding down your left mouse button (or right mouse button for right handed people) and moving your files from one place to another. During this process, you know that you shouldn’t let go of your mouse button until you find your proper new place for your file. You can then release your finger and it’s done.
For example, you have just dragged and dropped a file from a folder to your desktop. Now, is there any way that you can have more control over the drag and drop? Is it possible to tell Windows to hold a file for you with the mouse while you go drink a cup of coffee and then return to finish the process? Is there a way to do this without the routine holding down and pressing your mouse button as you do all the time?
You may not be expecting it, but the answer is yes. Please read on to explore. There is a feature on the Windows XP mouse panel that allows you to click on a file for a second or so (in fact, you can decide on its time), then release your finger and your file is automatically locked, selected and ready to move as if you are still holding down your mouse button. Then, by simply moving your mouse, the dragging is done. So, whenever you find your desired place for the file to be placed, you can just finish your process with a single click. Can you believe that?!
To begin this technique, start by clicking on Start and going to the Control Panel. Please make sure that you are using the Classic View of your Control Panel. Then select the Mouse icon.

Now, your Mouse Properties window has appeared. Take a look at the top of the window to make sure the first tab, the Buttons Tab, is selected.

Now, look at the lower section of the window. This is where you will find the ClickLock properties area. Check the box that reads "Turn On ClickLock." Upon checking this box, the Settings button becomes vivid.

Click on it to pop up a small window with the ClickLock Settings feature.

As you can see in the image, there is a bar extended from the short to long period. With this, you can select the amount of time you want Windows to hold down your mouse button for you when you're transferring a file from one location to another. With whatever time period you choose, just remember that you won't have to continuously hold down your mouse button by yourself. Windows will do it for you. So, if you think you want it held for a long time, choose the long end of the scroll bar. Please note that Windows XP does this through software and your mouse button is not held down physically.
For an experiment, select the shortest time for now. Once you do that, you can experience the results right at this very moment. Just click on the blue header of the small window for nearly a second and then release your finger. What has happened? Without any clicking on any mouse button, just move your mouse to see your window moving.
You see, it’s a really comfortable method. You are dragging a window, but without your routine, repetitious holding down of your mouse button. Then, when you make a single click, it actually unselects your window. Try it! Move your ClickLock window to a corner of your desktop and then make a single click to drop your window there.
If you choose longer ranges, you should press your mouse button down longer before letting go. It’s really up to you to find the most convenient time for your needs.
Now, click OK and OK again to exit. The ClickLock feature is a very handy method that simply enables us to drag our files without having to continuously hold down our mouse buttons. It is also certainly more enjoyable and comfortable.

Advertising is King to the Success of Your Online Business

Advertising is the most important aspect of owning a home based business. You can have the classiest looking website on the internet and the best product on the plant but if no one knows about it you're not likely to be making a profit anytime soon.

So what is the king of advertising? TRAFFIC... You need lots of eye balls looking at your site and I mean lots of them. Not everyone window shopping your site will buy, but the odds go up when you have tons of people walking by that a percentage of them are interested in what you're selling.

How to Generate Traffic

Know your target market

The first thing any savvy internet marketers need to understand is his/her market. Are you selling to a younger or older group of people? This is important when you choose your method of marketing. The younger crowd is fascinated with gadgets. The older crowd....not so much. They might prefer email over podcasting. The delivery method is important in attracting their attention.

Social media sites like MySpace and Facebook are a great place today to capture events or your x-boyfriends love life. There is serious marketing adverting going on in these arenas. So don't overlook these platforms.

Keyword Generation

Once you understand your target market you need to develop a set of keywords to use that will draw those customers to your site. Utilization of those unique keywords in your website, online ads, blog posts and article publishing is the magic that combines you and the right customer.

You can never have too many or too few keywords. The key here is balance. If you have too few you risk not reaching your target market. If you have too many you risk being considered a spammer by the search engine web crawlers. If you write like you talk you will naturally meet that balance.

The Ad

When placing the ad you should give some real thought to your audience and location. A flashing banner ad might be great on blog site but not well received on your MySpace or Facebook profile page.

When using text ads like classifieds, emails and AdWords, your headline and keyword usages is important. Your headline should be attention grabbing and should use one or more of your keywords or keyword phrases. The body should give them just enough information to entice them to want to know more by clicking on your link.

I have found it beneficial to give your customers multiply ways of contacting you. Providing your name, a website url, email address, and phone number gives them options and legitimacy to you and your product.

Know Your Budget

Your advertising budget is a part of your overall business plan. It does not matter if your budget is zero or $2,000 per month, you can advertise and get your name out there. This is important to drive traffic to your site and important to your business.

Ideally you will have some funds allotted to advertising. You will need some budget to move your business forward. You might want to use your advertising money on placing ads and banners while using your time to post to your blogs, write articles and build your relationships on the social networking sites.

The key here is to spend your money wisely. Do your research on the sites you want to place ads and direct them to the proper target group. This little bit of effort will pay huge dividends in the end.

Advertising is like a puzzle; it can be difficult or it can be easy. By following these few tips you have all the pieces to the puzzle. With the proper time and effort given to each aspect you now have the knowledge to create campaigns that drive traffic to your website.

Cindy Floyd
Colorado Creative Solutions
303-429-6333
Ask me how you can earn huge commission weekly and have fun doing it.
http://www.ThingsLookGreatIn2008.com

Easy And Advanced Yoga - What Is The Difference?

Most westerners usually wince when they the subject of yoga is brought up. All they see is complicated poses done by yoga practitioners. But there is easy yoga and the advanced level, so everyone who is interested can pick it up. Both easy and advanced yoga are formed thousands of years ago in India to assist practitioners achieve balance and harmony in their life. With a balanced and harmonious body, it is easy to be one with the universe.

Yoga is never religious although it was passed down from traditional Hindu sacred document. Easy yoga poses can be obtained from classes, self-help books, self taught videos or DVDs but it is better to begin learning from a qualified yoga teacher. You will then pick up all the proper yoga poses.

Yoga lessons can be tailored for children, pregnant women, senior citizens, etc as easy yoga is not at all difficult to pick up. Exercises keep your body fit and healthy and easy yoga fits the bills as it can be done in relax and joyful approaches.

As your muscles grow suppler, you will experience a growing confidence in addition to rejuvenation, reassurance and relaxation. As a form of meditation, it can help reduce stress and frustrations as well as getting healthy.

Beginners can practice yoga by following few basic steps and from there you can fully understand and garner the many benefits of yoga. Through practicing beginning yoga, you will feel emotionally and physically better.

Initially you will have to pick up the dissimilar features of yoga and the differing types. The philosophy of yoga needs to be learned as well, including the breathing techniques that will assist you in relaxation so as to attain stability to be able to acquire a right frame of mind to do intense meditation.

As you started off with beginning yoga, you will have to experience many levels of yoga and from there build up capability to sense what can be done from one level to another. Altogether there are eight levels and you need to be able to overcome each to achieve insight to a greater life. It is necessary to observe the morals and ethics of yoga in order to lead healthy life.

One of the many benefits of beginning yoga is its curative purposes and it can better your mental and physical well being. Your body will become suppler and you will be able to move about easily and you will also gain muscles and a well toned body. The mental aspects will be a reduction in stress level with increasing consciousness and calmness of mind in addition to concentrating better.

Advanced yoga is taught not to show off but one of the main attribute is humility. Yoga lessons create harmony between mind, body and soul. Although it can be learn from DVDs, books, magazines, etc, do not attempt it if you are not familiar as it is more difficult that envisage. Advanced yoga is for those experienced practitioners and Pilates can be useful too, even though Pilates focus on body and not mind and soul.

Advanced yoga is a gradual build up from easy yoga but there is more than meet the eyes as building up your ethics and morals as well as staying calm and be able to take what life throws at you and follow god's guidance.

Advanced yoga can muster the mind to walk on broken glasses or through fire and even went without food for days, be clairvoyance and even levitate. But that is not what advanced yoga encourages as it is to be unified with the universe and show you the direction in life.

Another difficult type of yoga is the power yoga and it can be thought of as similar to karate. Even with experience in martial art instructions, you might not be sufficiently prepared to take on power yoga.

Power yoga require total dedication as the training can be intensive but it make little sense as yoga is understood to be relaxing and calming to the mind and body. But power yoga is very physical in nature.

Power yoga is all about fitness and complements the usual stretching, balance and focus; it helps in your blood circulation. The reason is more oxygen is propelled to the muscles, thus improving energy level.

Power yoga is the best way to keep fit and with this, it will help you to grow old with poise and not rapidly. Picking the techniques of power yoga is not enough, you need to practice consistently or your fitness level will drop. Sticking to a firm schedule daily is essential even with distractions. This is what discipline is all about.

Article Source: http://EzineArticles.com/719139

Troubleshooting & Checklist

The most common problem with any new PC build is partially made or improper connections. Most of the troubleshooting procedures in this blog require that the cover be removed form the PC and that some components be removed or reconnected. For this reason, it's best to plug in the PC through a switched power strip, so you can use the power strip switch to isolate the system from the electrical supply before every repair attempt.

Most people, even professional technicians, tend to get a little sloppy when troubleshooting, often accidentally introducing a new problem to replace the old. The main key to any type of troubleshooting is to go one step at a time. That way, when the original problem is corrected, you'll know exactly what did the trick, and if you create a new problem, you'll know what went wrong.

We will address five basic scenarios in this blog, ranging from a stone dead system to a lack of functionality, such as a modem that won't connect. Although these procedures will uncover most assembly errors, there is often no way to isolate a dead component without having other known good parts to swap out. In the world of professional PC troubleshooting and repair, the "swap' till you drop" strategy is still the most common troubleshooting technique employed. Swapping components requires no expensive diagnostics software or hardware and is usually the quickest way to isolate a problem. Another reason to steer clear of specialized diagnostics tools is that they are geared to identifying problems with subcomponents that can't be fixed anyway. Finding out exactly which address is bad in the system RAM or in the cache memory of a drive or motherboard is of little use when you'll have to replace the whole assembly anyway.

These troubleshooting procedures are for a newly built PC. If you have been using the PC for some time for any new problem that arises you have to consider the possibility of a computer virus. One way to check whether you have a hardware problem or a virus problem at boot time is to boot from your original operating system CD. If you do contract a virus, there are many virus doctor programs you can buy with a reasonable certainty they will fix the problem, but you may need Internet access to download the latest virus inoculations form the manufacturer's Web site.

In general, if you computer a serious recurring software problem with your PC, and you has good backups of any important data, the most reliable fix is to wipe clean the hard drive by deleting the primary partition with the FDISK program and reinstall the software form scratch. Just be really sure you have the original CDs and serial numbers for all the software you use, in addition to good data backups, because once you FDISK, it's all gone. Before running FDISK, confirm that your operating system CD will boot!

Caution: We cannot reiterate enough times that you should disconnect power from the system before making any change inside the case; then reconnect after each change to check the result. If you smell a burnt electronics odor at any time, you have a blown component and should not attempt powering up again until it is found and replaced and the cause of the failure is determined.

Stone DeadYou switch on your new system and there are no signs of life. The power supply fan doesn't turn; there are no sounds, no lights.

· Make sure the power cord is fully inserted into the power supply, the override switch on the back of the supply (if so equipped) is turned on, and the voltage switch is set correctly. Don't neglect to make sure the wall socket you are plugged into is live by unplugging the computer and plugging a radio or lamp to check.
· Recheck the motherboard documentation for the proper connection of the leads from the front panel power switch. Don't settle for just looking at the switch connection to the motherboard; remove the lead, check that the terminal block matches the documentation, and then reconnect it. Undo the main power supply connection to the motherboard (this requires pressing in the clasp as you pull gently on the connector), inspect the connector for damage, and reconnect. On Pentium 4 systems make sure you have connected the additional 12V header.
· Search for shorted components by disconnecting the power cables and ribbon cables from the drives; one drive at a time, retrying power up after each drive is disconnected. Without reconnecting the drives, remove each adapter card (leave video for last) one at a time, retrying power up after each removal.
· Remove and reinstall memory DIMMs or RIMMs, inspecting for physical damage. Remove and reinstall the heatsink and CPU, double checking the CPU fan is connected to the proper terminal on the motherboard. Never attempt to power up the system without the heatsink installed.
· In extremely rare cases, the power switch on the front panel may be faulty. You can use a continuity else that could cause a short circuit to the motherboard circuitry. Reinstall the motherboard in the case and reinstall the video adapter, then try powering up.

If you still have no power, the problem is most likely a defective power supply or motherboard.

Power Comes On; Screen Is DeadYou hear the power come on and the drives spinning up, but the screen remains blank.

· Make sure the monitor is plugged into a good power outlet by switching wall sockets with the power supply cord. If the power cord is not permanently attached to the monitor, make sure it is fully inserted in the socket on the back of the monitor. If your monitor is equipped with manual dials for brightness and contrast, make sure they are in the middle of their range.
· Remove the monitor connector form the video card and check that none of the pins in the shell are bent over. Note that some missing pins in the three-row high-density connector are normal.
· Remove and reseat the video adapter, making sure the hold down screw doesn't cause the back end of the adapter to lift partially out of the bus slot.
· Check for a defective or conflicting adapter on the bus. Remove any other adapters installed, one by one, rechecking power after each. Don’t forget to unplug the power supply, or turn off the power strip or override switch before each removal.
· Double-check the motherboard documentation for overlooked CPU selection switches or jumpers settings. Depending on the motherboard used, CPU selection might be automatic. Don’t take the manual at its word that default settings are set; check the actual switch and jumper positions on the motherboard.
· Double-check that CPU and memory modules are seated properly, particularly slot-type CPUs, which can take a good deal of pressure to mate correctly with the motherboard.

If you still have no live screen, the problem is likely defective hardware. Make sure the case speaker is properly connected to the motherboard as per the motherboard documentation. If you hear a series of beeps, note the number and sequence, s they will pinpoint the defective component. The motherboard documentation or manufacturer Web site should give the codes, although the most likely candidate for beeps on a dead screen is the video adapter. If no beeps sound, the most likely candidates are a dead monitor (easily checked by connecting it to another system), a defective motherboard, or a defective power supply. In some instances, you may have bad RAM or a bad video adapter but still not hear any beep codes.

Screen Comes On; No BootYou get text appearing onscreen, but the PC either won’t try to boot or locks up in the process.

No onscreen messages indicating boot failure.
Enter CMOS Setup by following onscreen instructions (usually by pressing the DEL or F1 key) after power up. Select the CMOS option to Restore Default Settings or similarly phrased option, save and reboot. Note: If you cannot access Setup, double-check that the keyboard and mouse connectors aren’t interchanged. If you still can’t access Setup, disconnect power and remover all adapters except the video and disconnect the drives. If you still can’t access Setup, you have some defective hardware, most likely the motherboard, although it could still be the RAM or CPU. These core components should always be bought from the same source to simplify return issues.
If there are still no messages indicating boot failure, enter CMOS Setup again and make sure the CPU speed setting, bus clock frequency, and IDE interface speed don’t exceed your component ratings.
If the system hangs at Verifying DMI Data Pool, it is usually a motherboard or IDE device problem. If you have an option to enable Reset Configuration Data, use it. Disconnect your IDE cables from the motherboard and see if you can get as far as a Drive Failure or No Boot Device message. If not, the motherboard will probably need replacing, although you can try discharging the onboard battery first by using the jumper setting in the motherboard manual for disabling a forgotten password.
Missing operating system or no boot device message.· Check that the IDE cables are connected to the drives and motherboard properly by removing and reinstalling them. Make sure the power connectors to all the drives are properly installed. Make sure the master / slave jumpers for the drives are installed properly.
· If the system tries to boot a CD and fails, it may just be bad timing. Strangely enough, some high-speed CD drives take so long to get up to speed that the BIOS (motherboard logic) gives up on them before they get there. If the screen displays a message such as “Insert CD and hit any key when ready,” eject the CD tray; then push it back in, but wait until you hear the drive spin up before pressing a key to continue. It might take a few efforts to get this right if it’s going to work.
· Check that the operating system CD is readable in another system, and don’t try using pirated operating system software on home recorded CDs.
· Enter CMOS Setup and rearrange the boot sequence so that the CD-ROM or the IDE channel to which it is connected is selected as the first boot device. This shouldn’t be necessary, but it will help if a previous attempt to install the operating system failed, leaving the hard drive appearing bootable to the motherboard.
· Simplify the system by removing any additional drives so all you have left are a “master” hard drive on the primary IDE channel. If it doesn’t work, as a final check try both drives on the primary controller with the CD as the “slave.”

Boots; Locks Up During Or After OS InstallEverything appears to be working fine, right up through formatting the hard drive. But, at some point during the operating system installation or immediately after, the PC locks up.

First check with your parts vendor or operating system manufacturer for known compatibility issues. Also be aware that some CDRs and combination drives have problems with operating system install, which usually manifests itself as a “read error”.
Unplug the power and remove all adapters except the video adapter. Install the operating system. Next install the motherboard drivers from the CD that shipped with the motherboard and the video adapter driver from its own CD. Install any other adapters one at a time, reconnect power and reboot, allowing the operating system to deal with them individually.
Make sure you are using the approved cabling for any high-performance parts such as 80-conductor ribbon cables with Ultra 66 or Ultra 100 hard drives, because communication breakdowns at high speeds are likely to show up under the load of operating system installation.
In some rare cases, operating system installation can fail repeatedly because a borderline component is suffering a heat-related failure as the system warms up. This is extremely difficult to troubleshoot without parts to swap out, and if you bring the parts back to the point of purchase, it might be hard to convince the vendor that the problem isn’t in your imagination. Make sure the CPU heatsink is properly installed, the heatsink fan is working, and you aren’t building the system in a hot attic in the summer. Go through the steps related to CMOS Setup in scenario 3 and document all the troubleshooting steps you go through for the vendor. Try reinstalling the operating system several times with no adapter other than video before concluding that you have a hardware failure.

Boots and Runs
If you operating system installation goes smoothly but you have trouble accessing a particular device, the problem is as likely to be software as hardware. Extensive software troubleshooting is outside the scope of this website, but we will mention some of the key points you can check in Windows operating systems.

Hard Drive
· Any message indicating a hard drive read or write failure is a hardware error. Try replacing the ribbon cable, making sure you use the newer 80-conductor type.
· Isolate the hard drive on its own IDE channel, moving any other drives to the secondary channel on their own cable or temporarily disconnecting them.
· If the hard drive is excessively noisy or makes a continual clunking sound, it has suffered internal damage and odds are even an expensive data recovery outfit won’t be able to help

CD or DVD Drive
If the drive has trouble reading a particular disc, try wiping off any fingerprints with a clean flannel shirt. Note rewriteable discs written in CDRs and DVDRs are often unreadable in other drives.
For continual read errors, try all the steps for hard drive troubleshooting new IDE cable, isolation, and swapping IDE hard drives, so isolating them on their own controller will often fix the problem.
If you can’t play music CDs even though your speakers work with other computer sounds, the thin audio cable from the sound card (or motherboard with integrated sound) to the four-pin connector on the back of the drive is improperly installed or missing.
If you record music CDs on our PC and they won’t in your stereo, make sure you are using CDR blanks, not CDRW.
If you have a CDR or DVDR and your write sessions often fail, try recording at a lower speed and make sure you are using media certified for at least the speed at which you are recording.

The Desktop Computer Isn't Dead Yet

According to news articles in the past year or two, the desktop computer is beginning to cry "I don't want to go on the cart." According to this article, the arrival of real tablet PCs is going to take a slice of the computer market, and it won't be coming from netbook or laptop sales.

I won't deny that laptops are everywhere these days, and getting more powerful all the time. Currently, I use a laptop as my main computer, and have a 10-year-old desktop kicking around used to play YouTube videos and such on my TV. I, for one, plan to buy a desktop computer as my next major computer purchase, for several reasons.

Firstly, my laptop hardware went obsolete REALLY fast. I bought it in July 2007, and by the fall there were far more powerful models out for the same price. I bought a model with a decent-enough video card in hopes of playing a few games, but even games of several years earlier than 2007 had to be run with minimal video settings. As far as 2010 games go, the situation is hopeless.

Secondly, I dislike very much that for my laptop's processor to run at full advertised speeds, the bottom of the computer gets hot enough to cook pizza pops on. If I hadn't bought the 12-cell battery that lifts the bottom of the computer off the desk, providing extra ventilation, the computer would be hot enough to cook two pizza pops on. It's possible that newer laptops are better now and don't run as hot, but I've always found myself running in power saver mode at 600 MHz just so I didn't scald my lap.

Thirdly, one of the main arguments against desktop computers is that they are chained to your desk. While it's nice that laptops have batteries and can go anywhere, they still need to spend some amount of time chained to a wall outlet every so often. Until wireless power is brought to the consumer market, laptops will still partially have the same chained problem as desktops. After a few years, your laptop battery goes and you have to stay chained to the wall all the time anyway.

Desktop computers have much more longevity than laptops for several reasons, meaning that they're more worth the money you spend on them in the long term. First and foremost, desktops are super upgradeable if you buy a system with future upgrades in mind. You can always pop in more RAM, another hard drive, another video card, etc. Laptops are almost always not so. Also, the hard drive in a desktop will last much, much longer than that of a laptop, because it remains stationary all the time. Laptops bounce around all over the place, and usually the hard drive will give out in a few years' time at most. My current 10-year-old desktop still has its original hard drive running fine. When your laptop eventually does need repair, one needs to either send it away to a manufacturer for weeks, or attempt to dismantle the entire computer, just to tinker with whatever is broken. When a desktop computer is opened up, everything is easily accessible and within reach.

It used to be that you could make a valid argument against desktops and their space requirements. You need room for that giant CRT monitor, and someplace to put your tower. These days, you can buy compact desktops that are about the size of a laptop standing on its side, or even smaller if you look at the Home Theater PC market. LCD monitors are the standard these days, so they don't require much space either.

I can't speak for the rest of the computer user world, but when I need to sit down and focus on work on the computer, I work more productively if I'm sitting at a desk. If I'm sitting at a desk, I enjoy having a big screen to spread out all my windows on, and a mouse and keyboard. I could use all these accessories with a laptop, but it seems more practical to me to have a dedicated desktop hooked up, rather than plugging and unplugging from my comparatively underpowered laptop all the time. I can especially see this situation if I ever found a job doing computer work from home, as I imagine is the case for a significant portion of the working population in the computer industry.

In the past year or two I've seen home servers come out on the market for the average computer user. Regular users are beginning to realize the importance of file backup and the convenience of central media servers. Combine this market with the home theater market, and you have one desktop-dominated market area. Laptops just don't make sense to be run as always-on servers.

Desktops can clearly offer more performance power than laptops if you are willing to pay for it, and it's not just hardcore gamers that need the power anymore. Users of CAD software, graphical design software, video editing and encoding software, and virtualization software all need a large amount of RAM, processing power, and storage space. Even software developers would enjoy faster compile times for development projects, even if it means less time to use as a valid slacking-off excuse.

In short, if desktops are losing share of the PC market, it will stop losing and eventually stabilize. The desktop computer is not going away any time soon.